Удлинитель PLANET < POE-E202>

PLANET

POE-E202

PoE Extender

Металл

6 Гбит/ с

Поддерживается, до 10 Кб

140 x 77 x 28 мм

0.234 кг

16.43 x 12.29 x 9.65 см

0.371 кг

4.46Mpps @ 64 bytes

1.6 watts/ 5.5BTU (System on with PoE input) , 2.2 watts/ 7.5BTU (Ethernet full loading without PoE function) , 36 watts/ 122.8BTU (Full loading with PoE function)

2 x 10/ 100/ 1000BASE-T Ethernet with IEEE 802.3at/ 802.3af PoE “ Data + DC power " out, auto MDI/ MDI-X, auto-negotiation RJ45 connector

10/ 100/ 1000Mbps

Metal

Temperature: -10 ~ 70 degrees C, Relative Humidity: 5 ~ 95% (non-condensing)

10KB

“PoE In" Port: 52~56V DC, max. 30.8 watts, Per “PoE Out" Port: 44~55V DC, max. 25 watts

“PoE In" Port: IEEE 802.3at Power over Ethernet Plus end-span/ mid-span PD class 4 PD, Per “PoE Out" Port: IEEE 802.3at Power over Ethernet Plus end-span PSE, IEEE 802.3af Power over Ethernet end-span PSE

PLANET

IEEE 802.3at compliant with voltage within 52V-56V DC

IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3af Power over Ethernet, IEEE 802.3at Power over Ethernet Plus, IEEE 802.3x Flow Control

Wall mountable

Store-and-Forward

1-Порт 802.3at PoE+ в 2-Порта 802.3af/ at Гигабитный PoE Удлинитель

2Mbits

“PoE In" Port: 1/ 2 (+) , 3/ 6 (-) ; 4/ 5 (+) , 7/ 8 (-) , Per “PoE Out" Port: 1/ 2 (+) , 3/ 6 (-)

234g

FCC Part 15 Class A, CE

140 x 77 x 28 mm

ESD (Ethernet) : 2KV (TBD) , Surge (EFT for power) : 2KV (TBD)

2K

6Gbps

Temperature: 0 ~ 50 degrees C, Relative Humidity: 5 ~ 95% (non-condensing)

1 x 10/ 100/ 1000BASE-T Ethernet with IEEE 802.3at PoE “ Data + DC power " in , auto MDI/ MDI-X, auto-negotiation RJ45 connector

“PoE In" Port: PoE-in-Use x 1 ( Orange ) , LNK/ ACT x 1 ( Green ) , “PoE Out" Port 1: PoE-in-Use x 1 ( Orange ) , LNK/ ACT x 1 ( Green ) , “PoE Out" Port 2: PoE-in-Use x 1 ( Orange ) , LNK/ ACT x 1 ( Green )

Physical Port 3-port 10 / 100 / 1000BASE-T Gigabit RJ45 interface - 1-port data + power input - 2-port data + power output , Power over Ethernet 1-port data + power input - Complies with IEEE 802.3at Power over Ethernet Plus end-span/ mid-span PD- Supports PoE input power up to 30.8 watts 2-port data + power output - Complies with IEEE 802.3af/ IEEE 802.3at Power over Ethernet end-span PSE- Up to 2 IEEE 802.3af/ 802.3at devices powered- Supports PoE power up to 25 watts for each PoE port- Auto detects powered device (PD) Extends the range of PoE to an additional 100 meters (328ft.) Forwards both Ethernet data and PoE power to remote device , Layer 2 Features Hardware based 10/ 100/ 1000Mbps auto-negotiation and auto MDI/ MDI-X Integrates address look-up engine, supporting 2K absolute MAC addresses 10K iumbo packet support IEEE 802.1Q VLAN transparency Features Store-and-Forward mode with wire-speed filtering and forwarding rates IEEE 802.3x flow control for full duplex operation and backpressure for half duplex operation Automatic address learning and address aging Supports CSMA/ CD protocol , Case and Installation No external power cable installation required Made of metal, desktop size design Wall-mountable, Plug-and-Play installation 0 ~ 50 degrees C operating temperature

POE-E202

IEEE 802.3x pause frame for full duplex, Back pressure for half duplex

10BASE-T: 4-pair UTP Cat. 5 up to 100m (328ft) , 100BASE-TX: 4-pair UTP Cat. 5 up to 100m (328ft) , 1000BASE-T: 4-pair UTP Cat. 5e, 6, up to 100m (328ft) , EIA/ TIA-568 100-ohm STP (100m, 328ft)

End-span (Type A)